Page 1 of 3 1 2 3 LastLast
  1. #1

    After 3dmark 11 installed/ran, Vantage is CORRUPTED

    More good times on the way!

    Falcon_CMH and jrmitchell1983 (EVGA boards) found that 3Dmark 11 updates your sysinfo and replaces the that of Vantage. This renders Vantage corrupted (tearing, artifacts etc).

    A reinstall does NOT fix, you must do a system restore in order to run Vantage properly again.

    See thread here: http://www.evga.com/forums/tm.aspx?h...mpage=1#727193

    Confirmed here, had to restore.

    Nice work gentlemen.
    Last edited by Johnny Utah; December 8, 2010 at 08:31. Reason: confirmation of problem

  2. #2
    Emperor Apprentice
    • Computer Specs
      • Motherboard or Laptop:
      • Asus Rampage V Extreme
      • Chipset:
      • X99
      • CPU:
      • Intel i7 5960X
      • CPU Overclock Speed:
      • 4.625GHz
      • Memory:
      • 16GB
      • Memory Speed:
      • DDR-2750
      • Video Card(s):
      • Asus 980 Ti Strix
      • Hard Drive(s):
      • Samsung 850 Pro
      • Operating System:
      • Windows 7 Ultimate x64

    Joined
    Jun 2001
    Posts
    9,337

    Re: After mark 11 installed, Vantage is CORRUPTED

    I can't even run Vantage anymore. Also related to System Info.

    See my thread:
    http://futuremark.yougamers.com/foru...d.php?t=139005

  3. #3

    Re: After mark 11 installed, Vantage is CORRUPTED

    Quote Originally posted by YCH View Post
    I can't even run Vantage anymore. Also related to System Info.

    See my thread:
    http://futuremark.yougamers.com/foru...d.php?t=139005
    I feel your pain brother. You will have to do a system restore to before you installed 3dmark11, this seems to be the only solution. Maybe we can get an admin here to confirm and get this FIXED?

  4. #4
    Emperor Apprentice
    • Computer Specs
      • Motherboard or Laptop:
      • Asus Rampage V Extreme
      • Chipset:
      • X99
      • CPU:
      • Intel i7 5960X
      • CPU Overclock Speed:
      • 4.625GHz
      • Memory:
      • 16GB
      • Memory Speed:
      • DDR-2750
      • Video Card(s):
      • Asus 980 Ti Strix
      • Hard Drive(s):
      • Samsung 850 Pro
      • Operating System:
      • Windows 7 Ultimate x64

    Joined
    Jun 2001
    Posts
    9,337

    Re: After mark 11 installed, Vantage is CORRUPTED

    Quote Originally posted by Johnny Utah View Post
    I feel your pain brother. You will have to do a system restore to before you installed 3dmark11, this seems to be the only solution. Maybe we can get an admin here to confirm and get this FIXED?
    Well I don't have System Restore turned on, and even if I did, I probably won't do it so soon (I have an unexplainable distrust of System Restore). I'll wait a couple days and see what the FM staff says. Usually Jarnis or someone else at FM will respond to legit complaints - and I do think this is one.

  5. #5

    Re: After mark 11 installed, Vantage is CORRUPTED

    Wonderful, hopefully this will be addressed immediately. I am certain that many many more people will have this problem. Most are still benching with Mark11...and have not even thought about Vantage.

  6. #6

    Re: After mark 11 installed, Vantage is CORRUPTED

    Same here, vantage corrupt on my SLi (GTX580) setup but not on my second (GTX460) rig.

  7. #7
    Junior Member
    Joined
    Sep 2007
    Location
    Amsterdam, Netherlands, Netherlands
    Posts
    54

    Re: After mark 11 installed, Vantage is CORRUPTED

    I can confirm that this is definitely a problem. If you have 3D Mark 11 installed then 3D Mark Vantage does not work properly. That assumes both programs are installed into the same hard drive.

  8. #8
    Super Moderator
    • Computer Specs
      • Motherboard or Laptop:
      • ASUS N53SV-DH51
      • CPU:
      • Core i5 2430M
      • Memory:
      • 8GB
      • Memory Speed:
      • DDR3 1333
      • Video Card(s):
      • GT 540M
      • Hard Drive(s):
      • 160GB Intel X25-M G2
      • Optical Drives:
      • BD-ROM
      • Operating System:
      • Windows 7 HP x64

    Joined
    Apr 2002
    Location
    CA, USA
    Posts
    20,154

    Re: After mark 11 installed, Vantage is CORRUPTED

    I also can confirm this occurs.

  9. #9
    Firefly
    Joined
    Jul 2009
    Location
    Mahaska County Correctional Facility
    Posts
    961

    Re: After mark 11 installed, Vantage is CORRUPTED

    Vantage runs fine for me. Actually just had my best run to date. Ran 11 right after and it's good too.

    Running an E8400 OC'd to 3.6/gtx460 @ 820/2000/4gb Dominator GT 1600/790i Ultra/260.99 drivers.

  10. #10

    Re: After mark 11 installed, Vantage is CORRUPTED

    Quote Originally posted by AgentSmith5150 View Post
    Vantage runs fine for me. Actually just had my best run to date. Ran 11 right after and it's good too.

    Running an E8400 OC'd to 3.6/gtx460 @ 820/2000/4gb Dominator GT 1600/790i Ultra/260.99 drivers.
    Are you running it with "System Info" unchecked? If you are, you won't get any problems obviously, but you will NOT be able to submit scores. This is the crux of the problem.
    Last edited by Johnny Utah; December 8, 2010 at 18:31. Reason: Spelling

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •