+ Reply
Page 2 of 2 FirstFirst 12
  1. #11
    Junior Proxycon Emperor
    • Computer Specs
      • Motherboard or Laptop:
      • GA-Z68X-UD3P-B3
      • Motherboard BIOS:
      • UEFI Beta F
      • Chipset:
      • Intel Z68
      • CPU:
      • Intel i5 2500K
      • CPU Overclock Speed:
      • 4.4Ghz
      • CPU Cooler:
      • CM Hyper 212+
      • Memory:
      • 8GB Corsair XMS
      • Memory Speed:
      • 1866Mhz
      • Video Card(s):
      • Inno3D iChill GTX 970 OC
      • Video Card Speed:
      • 1088/1228/7010
      • Sound Card:
      • Soundblaster Z
      • PSU:
      • PCandP 610 Silencer
      • Hard Drive(s):
      • Samsung 840 Pro 128GB, 1TB WD Steam Drive, 1TB Seagate ST1000DX001 SSHD
      • Optical Drives:
      • DVD RW
      • Operating System:
      • Win 7 Ultimate SP1

    Joined
    Nov 2001
    Location
    UK, England.
    Posts
    12,368

    Re: GEFORCE R300 DRIVER 301.24 BETA's

    I've tried the 301.24 and .25, i was able to overclock the same with both. I might try the 301.10 to see if they allow higher clocks. [yes]

  2. #12
    Junior Master Onion
    • Computer Specs
      • Motherboard or Laptop:
      • Asus P9X79 Deluxe
      • Chipset:
      • X79
      • CPU:
      • Intel Core i7 3960X
      • CPU Overclock Speed:
      • 5000MHz
      • CPU Cooler:
      • EK Supremacy
      • Memory:
      • G.Skill RipJawsZ 16GB
      • Memory Speed:
      • 2133MHz
      • Video Card(s):
      • Nvidia GTX 680 3-Way SLI - EK Cooled
      • Video Card Speed:
      • 132% +100 Core +400 Memory
      • Sound Card:
      • Schiit Audio Bifrost DAC
      • PSU:
      • Corsair AX1200
      • Hard Drive(s):
      • 2x Kingston HyperX 240GB RAID 0
      • Operating System:
      • Windows 8 64bit

    Joined
    Oct 2000
    Posts
    5,124

    Re: GEFORCE R300 DRIVER 301.24 BETA's

    Quote Originally posted by icemanchilled View Post
    I've tried the 301.24 and .25, i was able to overclock the same with both. I might try the 301.10 to see if they allow higher clocks. [yes]
    Back on the 301.10 and its back to normal. Not sure what happened, could have been something else but I did check everything I could think of.

    Going to stick with these until the next release.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts