question about nic and vmware (configure management network)
i am just now installing and starting the learning process for vmware.
i have a server
4 ports (nic)
i have been told out of a vmware server that 2 ports should be dedicated to the SAN and 2 should be for network/lan traffic.
so i have just finished installing vmware esxi 4.1.0 essentials plus.
i am at the:
configure management network: network adapters:
should i select all 4 nics so that vmware will do the load balancing ?
or do i ONLY have 1 selected via vmware and the rest configured via 2008r2 (btw - can a 2008r2 guest see a nic that i have not selected in vmware ?)
Last edited by troyquigley; 04-27-2011 at 06:57 PM.